Attachment Name: Wedge Fixture

Attachment model: JXSA104B

Maximum test force: 10kN

Joint size: φ 20

Clamping width: 35

Clamp size: Flat jaws 0-6

Sample hardness: less than HRC24.

matters needing attention:

If there is excessive dust, corrosive smoke, or harmful substances in the laboratory or surrounding environment, protective measures must be taken for the fixtures.

Apply molybdenum disulfide grease to the relative moving parts of the fixture.

If the fixture is unused for a long time, daily maintenance should be carried out on the fixture:

2.1 Remove the fixture from the testing machine;

2.2 Remove the jaws, wipe them clean, and apply anti rust oil;

2.3 Wrap the fixture in oil paper and store it.